Nalalka Kaaliyaha Aluminium Nidaamka Iftiinka Tooska ah ee Nidaamka Iftiinka Xadhkaha LED
Heerka Spectroscopic ee strip LED
U hoggaansanaanta heerka caalamiga ah ee ANSI, waxaan u qaybinnaa CCT kasta 2 ama 3 biin, kaas oo u yar sida 2-tilaabo, si loo hubiyo in macaamiishu ay helaan midab isku mid ah xitaa amarrada kala duwan ee nalalka laydhka leh.
Dooro midab kasta sidaad rabto dhammaan xariijimaha hogaanka ah
Waxaad astaysto midab kasta, hirarka dhererka, CCT, iyo BIN isku xirka LED marka lagu daro midabka caadiga ah, CCT iyo BIN.
SDCM <2
Si loo siiyo macaamiisheena nalalka laydhka leh ee ugu fiican, dhammaan hogaankayagu waxay ku walaaqayaan SDCM <2, ma jiro farqi muuqaal ah oo u dhexeeya dufcaddii isku midka ah ee alaabta
Maamulka Bin ee u gaarka ah macmiilka
Had iyo jeer isku mid ah Binka dufcadaha kala duwan Hal bin, 2-tallaabo, dhammaan nalalka xariifka ah waa kuwo aan lahayn farqi muuqaal ah weligeed
Cajaladda LED FS CRI>98, sida dabiiciga ah sida qorraxda
Midabaynta midabku waa sida dabiiciga ah sida qoraxda oo leh CRI≥95 ama LEDs spectrum oo buuxa;
Tilmaamaha Codsiga Xarigga LED
Heerkulka midabka kala duwan ee degaannada kala duwan ayaa suurtogal ka dhigaya in la doorto isha iftiinka LED-ka habboon ee loo baahan yahay.
ECP-1212-2
ECP-0812-2
ECP-0709-2
Macluumaadka aasaasiga ah
Astaamaha
AL6063-T5 profile aluminium oo leh daaweyn dusha sare leh oo tayo sare leh iyo saddex midab oo ikhtiyaari ah oo madow, caddaan iyo qalin ah
Isha iftiinka oo si gaar ah loo nashqadeeyey oo leh kombuyuutarrada kala qaybiya oo soo saaraya nalal isku mid ah & kuwo jilicsan
Siyaabo kala duwan oo loo rakibo: pendant, recessed iyo dusha ku rakiban
Chips-ka Calaamadaha LED-ka
Waxaa lagu soo saaray silig dahab ah iyo guddiga wareegga wareegga naxaasta, hubinta tayada wanaagsan iyo cimri dhererka.
Lakabyada labalaab PCB
Dhammaan xariijintu waa pcb laba-geesood ah, ugu yaraan 2ounces pcb, hoos u dhaca danab yar iyo kulaylka wanaagsan.
1BIN LED & 3 SDCM ayaa diyaar ah
Waxa uu hubin karaa in 1 Dufcaddii, Midabka Dufcadaha Badani ay joogto.
Waqtiga nolosha
LED leh 50000 saacadood cimrigii oo dhaafay LM-80.
3M Cajaladda Dhabarka
3M cajalad dhejis ah oo leh dhejis adag, fudud oo ku habboon in loo isticmaalo dusha kasta.
Dhererka la gooyn karo
Goynta DIY, 12v waxaad gooyn kartaa 3leds kasta, 24v, waxaad gooyn kartaa 6leds kasta.
Muuqaal Codsi Badan
Iftiinka Gudaha, Iftiinka Banaanka, Iftiinka Ganacsiga, Iftiinka Muuqaalka, Iftiinka Qurxinta, Qurxinta Bananka Dhismaha, Iftiinka Xayeysiiska, Iftiinka Mashruuca.
Isha iftiinka
| Qaabka | CRI | Lumen | Voltage | NoocaAwood | LEDs/m | Cabbirka |
| Jidka FPC 2216-120-24V-4mm | >90 | 640LM/m (4000K) | 24V | 9.6W/m | 120 LEDs/m | 5000x4x1.2mm |
Foomka soo socdaa waa inuu kaa caawiyo inaad doorato laydhka ku habboon ee laydhka LED si aad u buuxiso shuruudahaaga kala duwan.
| CCT | Codsiyada caadiga ah | Maqaallada Wareejinta ugu Wanaagsan | CCT | Codsiyada caadiga ah | Maqaallada Wareejinta ugu Wanaagsan |
| 1700K | Dhismaha Qadiimiga ah | / | 4000K | Suuqa | Dharka |
| 1900K | Naadiga | Oo qaraami ah | 4200K | Suuq weyn | Miraha |
| 2300K | Matxafka | Rooti | 5000K | Xafiiska | Ceramics |
| 2500K | Hotel | Dahab | 5700K | Wax iibsiga | Alaabta qalinka ah |
| 2700K | Homestay | Qoryo adag | 6200K | Warshadaha | Jade |
| 3000K | Qoyska | Haragga | 7500K | Qolka musqusha | Muraayadaha |
| 3500K | Dukaan | Taleefanka | 10000K | Aquarium | Dheeman |
Faahfaahinta Xirmada
Xidhmada Shakhsi ahaaneed
| Qaabka | Nooca | Cabbirka (mm) | NW(kg) | GW(kg) | Nuxurka |
| ECP-0709 | Silinder wareeg ah | Ø22*2580 | 0.222 | 0.49* | 1 set (Profile + Diffuser + Koofida dhamaadka + clips) |
| ECP-0812 | Silinder wareeg ah | Ø22*2580 | 0.24 | 0.51 | 1 set (Profile + Diffuser + Koofida dhamaadka + clips) |
| ECP-1212 | Silinder wareeg ah | Ø22*2580 | 0.24 | 0.51 | 1 set (Profile + Diffuser + Koofida dhamaadka + clips) |
Xidhmada Xidhmada
| CBM (m3) | Cabbirka (mm) | NW(kg) | GW(kg) | Qty/ xidhmo | |
| ECP-0709 | 0.025 | 110*88*2580 | 3.56 | 7.8 | 16 dhigay |
| ECP-0812 | 0.025 | 110*88*2580 | 3.85 | 8.12 | 16 dhigay |
| ECP-1212 | 0.025 | 110*88*2580 | 3.88 | 8.2 | 16 dhigay |
Ka taxadaritaan
※ Fadlan ku wad xariijimaha ledhka oo leh quwad go'doon ah oo loo baahan yahay, iyo qulqulka isha danabka joogtada ahi waa inuu ka yaraado 5%.
※ Fadlan xariijimaha ha u laabicin qaanso dhexroorkeedu ka yar yahay 60mm si aad u hubiso cimriga iyo isku halaynta
※ Ha laabicin haddii ay wax yeello soo gaarto tusmooyinka LED-ka.
※ Si adag ha u jiidin siliga korontada si aad u hubiso cimriga dheerShil kasta wuxuu waxyeeleyn karaa iftiinka LED-ka waa mamnuuc.
※ Fadlan hubi in siliggu ku xidhan yahay anode iyo cathode si sax ah.Korontadu waa inay la socotaa korantada fiilada si looga fogaado burbur.
※ Nalalka LED-ka waa in lagu kaydiyaa meel engegan oo xidhan.Fadlan ka soo fur oo kaliya ka hor isticmaalka.Heerkulka deegaanka: -25℃ ~ 40℃.
Heerkulka kaydinta: 0℃ ~ 60℃. Fadlan isticmaal xariijimaha iyada oo aan biyuhu celinayn gudaha deegaanka gudaha oo leh qoyaan ka yar 70%.
※ Fadlan ka digtoonow xilliga qalliinka.Ha taaban korontada AC haddii ay dhacdo shoog koronto.
※ Fadlan u dhaaf ugu yaraan 20% quwada korontada inta aad isticmaalayso si aad u hubiso in ay jirto koronto ku filan oo lagu wado alaabta.
※ Ha u isticmaalin aashitada ama xabagta alkaline si aad u hagaajisid alaabta (tusaale: sibidhka dhalada).
FAQ
1.Waa maxay nooca chips aan u isticmaalno iftiinka LED?
Waxaan inta badan isticmaalnaa chips-yada LED-ka, sida Cree, Epistar, Osram, Nichia.
2.Waa maxay alaabta ugu muhiimsan ee shirkadda ECHULIGHT?
Alaabadayada ugu muhiimsan waxaa ka mid ah xariijinta LED-ka, xariijinta LED-ka NEON iyo Nidaamka Profile Linear.
3.Miyaan heli karaa muunad dalbashada laydhka LED?
Hubaal, si diiran ayaa laguugu soo dhawaynayaa inaad naga codsato muunad si loo baadho oo loo hubiyo tayada alaabta.
4.Waa maxay waqtiga hogaanka shirkadeena?
Guud ahaan dalabka muunadku waxa uu qaataa 3-7 maalmood wax soo saarku waxa uu qaataa ilaa 7-15 maalmood.
5.Sideen u dhoofinnaa alaabta dibadda?
Caadiyan, waxaanu badeecadda ku soo dirnaa si degdeg ah sida DHL, UPS, FedEx iyo TNT.Dalabka badan waxa aanu ku soo rarnaa hawada iyo badda.
6.Ma aqbashay dalabaadka OEM/ODM?
Haa, waanu aqbalnaa amarada la habeeyey waxaanan bixinaa arrimo badan oo kala duwan oo is-habaynta ah.
7.Waa maxay nooca dammaanadda aad u bixiso alaabta?
Guud ahaan, waxaan bixinaa 2-5 sano oo dammaanad ah inta badan alaabadayada iyo dammaanad gaar ah ayaa diyaar u ah amarada gaarka ah.
8. Sidee shirkaddaadu wax uga qabataa cabashooyinka?
Dhammaan alaabtayada waxaa lagu soo saaraa nidaamka xakamaynta tayada adag iyo heerka cilladaysan wuxuu noqon doonaa wax ka yar 0.2%.
Dhammaan alaabooyinka naga soo iibsada, waxaan ku siineynaa dammaanad bilaash ah inta lagu jiro xilliga dammaanadda.
Dhammaan sheegashooyinka, iyadoon loo eegin sida ay u dhacdo, waanu xallinaa dhibaatada marka hore adiga ka dibna waxaan hubineynaa waajibaadka.
-
Taleefanka
-
E-mailka
-
Sare
